Connection Troubleshooting

What to do if this doesn't work?

First check that you can see the name of your computer from the TouchOSC application, then select the the correct IPv4.

If you cannot see it then you might need to authorize Ableton Live or/and TouchOSC to access the Local Network, how to do this, may vary depening on your OS.

Then we want to verify that the "Send Port" (in TouchOSC) corresponds to the Input Port (in Live) and that the Output Name (in Live) corresponds to the Zeroconf (in TouchOSC).

Then you can click done in TouchOSC, launch the template and after that click refresh inside the Host device. If everything is correctly setup the connection status should show connected and the Remote should then be functionnal.

You can reachout to me directly here

Still stuck?

1. Try to change the Ports in and out of the Host device and the TouchOSC application.

Exemple: OSC Input / Send Port to 9010 & Receive Port = 9011

2. Like mentionned earlier, verify that Live and TouchOSC are correctly authorized to access the Local Network. (Varies depending on the OSC)

3. Avoid conflicting Zeroconf names.

If you have multiple instances of the TouchOSC application with the same Zeroconf name. (exemple, you have the desktop version running and also an iPad with it open and all on the same network)

This can lead to attribution of the IP and Port to the one device over the other. If that's the case simply change the name of the Zeroconf on your iPad and put that same name in the OSC Output section then click refresh.

4. Kill the device from Live, and ensure you only have one device with the TouchOSC app running on your network. Put everything back to the default configuration in TouchOSC. Still in TouchOSC, enter the correct IP in the OSC Connection panel (use the Bridge connection to get said IP). Click "Done", then launch the Template and insert back the Host in Live.

Default Config: "Send Port" = 9000 / "Receive Port" = 9001 / "Zeroconf Custom" = Remote-Name